Driver Memory Seat And Mirrors; Driver Information Center (Dic) - Buick LESABRE GTK 2004 Getting To Know Manual

Getting to Know Your 2004 LeSabre
16
New Key
If a new ignition key is required, it
should be purchased at a Buick dealer-
ship. The key is matched to your vehi-
cle's module. The module will then learn
the new transponder key code.
See Section 2 of your Owner Manual.
Driver Memory Seat & Mirrors
(optional)
With the vehicle in PARK (P), adjust the
driver's seat, including the lumbar posi-
tion (optional) and both outside mirrors
to a comfortable position. This feature
also recalls the radio and climate control
settings. However, it does not include
the power head restraint settings.
• Press and hold the appropriate
Driver/MEMORY button (located on
the driver's door panel), to corre-
spond with the DIC Driver number,
until you hear two beeps.
• Follow the previous step with the
other key fob/transmitter to set up for
a second driver, and select the other
Driver/MEMORY button.
• Press and release the EXIT button.
With the transaxle in PARK (P), the
seat will move all the way back or to
your personalized exit position.
To recall the memory seat and mirrors
using the key fob/transmitter, program
the DIC Seat Recall feature to ON.
See Section 2 of your Owner Manual.

Driver Information Center (DIC)

(optional)
The DIC displays information about how
your vehicle is functioning and shows
warnings and messages if a system
problem is detected.
StabiliTrak ® Message
When the "STABILITY SYS ACTIVE"
message appears, a computer-
controlled system is automatically
activated. Some brake pedal noise or
vibration is normal. (StabiliTrak is an
optional feature.)
DIC Button Descriptions
• Press the ODO/TRIP button to dis-
play the vehicle's total mileage, and
Trip 1 or Trip 2 miles. Press the
ODO/TRIP button for the appropriate
trip number, then press the RESET
button to reset the trip odometer.
• Press the FUEL INFO button to dis-
play fuel economy, fuel average, fuel
instantaneous, fuel range and fuel
used. Press the ODO/TRIP button for
the appropriate trip number, then
press the RESET button while the