Table of Contents
Advertisement
2. Connection to the network
2.1.2 Connection in Infrastructure Mode
Set the following when connecting the projector and the computer in Infrastructure
mode.
Projector setting
1) Turn on the projector.
2) Press the MENU button on the remote control or the control panel of the
projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK > NETWORK SETUP >
WIRELESS SETUP
3) Set the following items in WIRELESS SETUP.
• MODE: INFRASTRUCTURE
• DHCP
• IP ADDRESS
• SUBNET MASK
• DEFAULT GATEWAY
• DNS SERVER
• SSID
• ENCRYPTION
As for setting an IP address, refer to About IP address. (&19)
Select APPLY, then press the ENTER button to reflect the settings.
16
QM00973-1
Advertisement
Table of Contents
