Connection In Infrastructure Mode - Hitachi CP-TW2503 User Manual

2. Connection to the network

2.4.2 Connection in Infrastructure Mode

Set the following when connecting the projector and the computer in Infrastructure
mode.
the power of the projector and pull out the power cord's plug from the outlet. Do
projector.
2) Turn on the projector.
3) Press the MENU button on the remote control or the
control panel of the projector.
DHCP
IP ADDRESS
DNS SERVER
SSID
ENCRYPTION
CH
As for setting an IP address, refer to "About IP address". (13)
16
USB TYPE A
ENTER
port of the projector.