Table of Contents
Advertisement
2. Connection to the network
Item
NETWORK
SETUP
/
PROJECTOR
NAME
(continued on next page)
Any name can be set to the projector to identify it on the
network.
(1) Select the PROJECTOR
NAME and press the ►
button. The PROJECTOR
NAME dialog will be
displayed.
Use displayed software keyboard to enter PROJECTOR
NAME.
(2) The current PROJECTOR NAME will be displayed on the
first 3 lines.
Use the ENTER or
characters.
To erase 1 character at one time, press the RESET button
or press the ◄ and
you move the cursor to DELETE or CLEAR ALL on screen
and press the ENTER or
characters will be erased. Up to 64 characters can be
input for the PROJECTOR NAME.
(3) To change an already
inserted character, move
the cursor to one of the first
3 lines, and move the cursor
on the character to be
changed. After pressing the
ENTER or
character is selected. Then,
follow the same procedure
as described at the item (2)
above.
(4) To finish entering text, move
the cursor to the OK on
screen and press the ►,
ENTER or
To revert to the previous PROJECTOR NAME without
saving changes, move the cursor to the CANCEL on
screen and press the ◄, ENTER or
Description
button to select and enter
button at the same time. Also if
button, 1 character or all
button, the
button.
30
button.
QM00973-1
Advertisement
Table of Contents
