Table of Contents
Advertisement
3.1 Projector Web Control - Date/Time Settings (continued)
1. Daylight Saving Time
Select the checkbox when using daylight saving time.
Item
Start
Month
Week
Day
Time
End
Month
Week
Day
Time
2. SNTP
Item
Server Address
Cycle
*1 The text length can be up to 255 alphanumeric characters, "-", and ".".
NOTE
• To enable the SNTP function, the time difference must be set.
• The projector retrieves Date and Time information from the time server and
overwrites time settings when SNTP is enabled.
• The internal clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
• The internal battery is required to be replaced when the time is off soon after
setting date and time.
• To use a domain name for the address of the SNTP server, setting the DNS
server is necessary.
Configures the date and time daylight saving time begins.
Configures the month daylight saving time begins.
Configures the week of the month daylight saving time begins.
Configures the day of the week daylight saving time begins.
Configures the time daylight saving time begins.
Configures the date and time daylight saving time ends.
Configures the month daylight saving time ends.
Configures the week of the month daylight saving time ends.
Configures the day of the week daylight saving time ends.
Configures the time daylight saving time ends.
Configures the SNTP server address.
This item can be set not only by IP address but also by
*1
domain name.
Configures the interval at which to retrieve Date and Time
information from the SNTP server.
Description
Description
61
3. Web Control
QM00973-1
Advertisement
Table of Contents
