Table of Contents
Advertisement
2. Connection to the network
NOTE
• If using a wireless network function, please make sure that NETWORK -
WIRELESS NETWORK setting is ON.
• Network settings can also be changed in Network Settings of Projector Web
Control.
• Wireless LAN initial settings for the projector are as follows.
Mode: Simple Access Point
IP address: 192.168.10.1
Subnet Mask: 255.255.255.0
SSID: SimpleAccessPoint
SSID Broadcast: ON
Encryption: OFF
Wireless Freq.: 2.4 GHz
Channel: 11
• The same network address cannot be used for both wireless LAN and wired
LAN.
• Communication speed of the projector may be deteriorated in Simple Access
Point mode depending on the number of connected devices.
14
QM00973-1
Advertisement
Table of Contents
