Accessing And Modifying Machine Settings - Bunn Crescendo Programming Manual

ACCESSING AND MODIFYING MACHINE SETTINGS

The following will guide you through each top-level setting found in programming.
STEP 1
• Set the toggle switch to
Program mode.
STATISTICS
EXIT YES
1. SELECT SIZE
Use to
select
STEP 4
• Selecting YES will display
statistics for the machine.
• Navigate to the next setting.
READY TEMP
(-) EXIT (+)
1. SELECT SIZE
Use to
Use to
decrease
increase
STEP 7
• This is the minimum temperature
required to dispense a beverage
(soluble tank).
• Navigate to the next setting.
OPERATING CONTROLS AND INTERFACE
PROGRAM MODE
PRESS TO ENTER
STEP 2
• Advance to the SM ESP GRIND
TIME screen.
ESPR TANK: ##
PWDR TANK: ##
Use to
Navigate
STEP 5
• Displays the current temperatures
for the tanks.
• Navigate to the next setting.
## ESPRSO TEMP ###
Use to
Navigate decrease
STEP 8
• The heater control target
temperature for the
espresso tank.
• Navigate to the next setting.
1. SELECT SIZE
Use to Navigate
1. SELECT SIZE
Use to
Navigate
(-) EXIT (+)
1. SELECT SIZE
Use to
Use to
Use to
increase Navigate
14
APPLICATION SW
VERSION 00.##
1. SELECT SIZE
Use to view additional
information.
STEP 3
• The screen will display the
software version.
• Use the hidden switch to view
app version, bootloader, PCAP,
configuration, power setting
and serial number.
TANK TEMP ##
(-) EXIT (+)
1. SELECT SIZE
Use to
Use to
decrease
increase
STEP 6
• The heater control target
temperature for the
soluble tank.
• Navigate to the next setting.
ESPRSO READY ##
(-) EXIT (+)
1. SELECT SIZE
Use to Use to
decrease increase
STEP 9
• This the minimum temperature
required to dispense a beverage
(espresso tank).
• Navigate to the next setting.
continued >
Use to
Navigate
Use to
Navigate
Use to
Navigate