Bunn Crescendo Programming Manual page 33

TEST DRAIN VALVE
DISPENSE TO TEST
TEST PUMP N VALV
DISPENSE TO TEST
TEST ESPRESO VALV
DISPENSE TO TEST
TEST SOLUBLE FAN
DISPENSE TO TEST
PUCK BIN
NOT PRESENT
TEST GRINDER
DISPENSE TO TEST
TEST FLOW METER
FLOW METER: 0
TEST PISTON
DOWN 140 UP
TEST SIEVE
OPEN 0 CLOSE
PUCK BIN
NO EXIT YES
PUCK CAPACITY
(-) ### (+)
STATISTICS
EXIT YES
ODOMETER
########
SM LIFETM COUNTS
SELECT BEVERAGE
MENU GLOSSARY
Pressing any switch on door will active the drain valve in the brew group
Momentary switch function.
Pressing any switch on door will active solenoid pump and espresso valve
Momentary switch function.
Pressing any switch on door will active the espresso valve Momentary switch
function.
Pressing any switch on door will active the soluble fan Momentary switch
function.
Signals puck bin status.
Pressing any switch on door will coffee grinder motor Momentary switch
function.
Pressing any switch on door will active espresso pump and hot water valve.
Flow counts will increment on LCD display. Momentary switch function.
Pressing button below "DOWN" or "UP" on LCD display will active appropriate
piston action.
Pressing button below "OPEN" or "CLOSE" on LCD display will active
appropriate sieve head action.
Pressing button below "YES" will enable the puck bin counting functionality,
whereas selecting "NO" sets up the machine for thru-counter operation.
Sets the amount of pucks the bin can hold before it needs to be emptied, and
is only allowed to be set if the puck bin feature is currently enabled.
Takes you to the statistics sub-menu so that you can look at cup counts.
Total overall drinks dispensed by this machine in its lifetime, non-resettable.
Drinks dispensed per beverage of the small cup counts size, press and release a
dispense button to see the number of times that recipe has been dispensed.
33
continued >