Software Setup For Through Counter Option; Locks / Disables - Bunn Crescendo Programming Manual

SOFTWARE SETUP FOR THROUGH COUNTER OPTION

1. Open the door and place the NORMAL/PROGRAM/RINSE switch in the PROGRAM position.
2. In the PROGRAM mode, use the LARGE cup, (button "A"), to navigate to the "LOCKS/DISABLES" menu.
3. Press the button under "YES" (button "B") and then the LARGE cup size, (button "A"), until the screen
displays the "PUCK BIN" screen.
4. In the default menu, "YES" will be flashing. Press the button under "NO" to disable the PUCK BIN mode.
5. When "NO" is flashing on the display, press the button under "EXIT" to return to the main screen.
6. Place the NORMAL/PROGRAM/RINSE switch to the NORMAL position.

LOCKS / DISABLES

1. Open the door and place the NORMAL/PROGRAM/RINSE switch in the PROGRAM position.
2. Use the Large Cup button to scroll to the LOCKS/DISABLES screen, and press the button under "YES".
3. In the DISPENSE LOCKOUT screen, pressing the button under YES will prevent the dispenser from
operation if the tanks are not at the minimum ready temperature requirement. Pressing the button
under NO will allow dispensing if the tank temperatures are below ready temperature requirement.
4. Press the Large Cup button to RINSE ALARM. Pressing the button under YES will enable the rinse
alarm. The screen will display RINSE ALARM TIME. Use the buttons under (-) and (+) to modify
the rinse alarm time. If the time set since the last rinse has been exceeded, a rinse required will be
displayed on the front door screen.
5. Press the Large Cup button to RINSE LOCKOUT.
Pressing the button under YES will disable the dispenser once the RINSE ALARM TIME has expired.
Running a rinse cycle will reset the timer, and enable the dispenser to resume normal operation.
6. Press the Large Cup button to LOW HPR LOCKOUT. Pressing the button under YES will prevent
espresso shots from being prepared if the coffee bean hopper detects a low bean level condition.
Filling the bean hopper above the low level will allow espresso brewing to resume.
OPERATING CONTROLS AND INTERFACE
17