Bunn Crescendo Programming Manual page 34

LG LIFETM COUNTS
SELECT BEVERAGE
SM RESETABL CNTS
SELECT BEVERAGE
LG RESETABL CNTS
SELECT BEVERAGE
APPLICATION
SW VERSION ##.##
ENTER PASSWORD 1
(-) 0000 (+)
ENERGY SAVER ?
NO EXIT YES
USB FUNCTIONS
EXIT YES
SET ESPRESSO SHOTS
EXIT YES
RECIPE SETUP ?
EXIT YES
SELECT ACTION
IMPORT EXPORT
TOUCH SETTINGS
NO YES
TOUCHLESS MODE
DISPENSE TO TEST
SENSITIVITY
NORMAL HIGH
CONFIRM DISPENSE
NO YES
MENU GLOSSARY
Drinks dispensed per beverage of the large cup counts size, press and release a
dispense button to see the number of times that recipe has been dispensed.
Same concept as the lifetime counters except these can be reset by the customer
as desired. This is for the small recipe size.
Same concept as the lifetime counters except these can be reset by the customer
as desired. This is for the large recipe size.
Screen to display the application and other software versions of the machine Can
also display the bootloader version, PCAP module version, and LCD type.
Screen to enter the password (either Level 1 or Level 2) to get further into the
program mode menus. Has an associated password "Set" screen as well.
Screen to enable or disable the energy saver mode feature.
Screen to select USB functions for importing and exporting machine
configuration.
Screen to select to configure the two espresso shot sizes on the machine.
Screen to select to configure all of the ingredients that dispense when a given
beverage key is pressed (or if it should be disabled).
Screen to select if you want to IMPORT setttings and recipes from the USB
Flash that is inserted, or if you want to EXPORT the configuration to the stick.
Screen to enter the sub-menu to adjust the system touch settings.
Screen to select to configure the PCAP module's operation mode, either as
"touch" (no), or as "touchless" (yes}. The screen will say "NOT AVAILABLE!" if
the PCAP is too old.
Screen to select to configure the PCAP module's sensitivity level within
whatever mode is currently selected, as either "normal" (instead of "low")
or "high".
Screen to select to configure whether or not user selected dispenses in
RUN mode require them to select the beverage key a second time as the
LED flashes to dispense.