Table of Contents
Advertisement
In certain instances, e.g. when using sliding switches in HMI applications, it may be
important for every write request to be processed and sent to the PLC. In such cases, select
the check box "Process all write requests".
Note
If more write requests are sent to the server than the server can send to the PLC, it may
negatively impact the transfer time between server and PLC.
3.5.2
New Device Wizard
When you create or modify a
You can view or modify an existing element, or create a new element.
The wizard shows the identification page of the device element. The device's name and
station number are specified here.
For detailed information, please refer to the online help under the keyword "New Device
Wizard".
3.5.2.1 Device Name
Specify a valid name for the device element. The name has to be unique among its siblings
and may not contain white spaces or non-alphanumeric characters. The only exception is the
underscore character "_".
3.5.2.2 Station No.
Specify the station number of the device. This number is used to distinguish between
devices if more than one device (e.g. PLC) is connected using the same communication
channel.
ACGM0143V4EN
device
element, the wizard is started in "(new) device mode".
3 Graphical User Interface (GUI)
63
Advertisement
Table of Contents
