Panasonic FP OPC Server User Manual page 77

Note
• In this case the settings are stored in the files "PxMEWCOMM.INI" and
"PxMewMultiEther.dat" in the folder C:\Users\UserName\AppData\Roaming
\Panasonic-ID SUNX Control\PxMEWNET. The user name in the folder is the
Windows login name of the current user.
• From version 2.100, communication is done via the PxMewnet manager. In former
versions (lower than 2.100) the communication is done via the NAiS MEWNET manager,
which stores the communication settings in different files. To keep the settings, please
refer to the corresponding troubleshooting section.
You must specify the communication channel on the first layer:
COM (serial and modem) communication
XX
N
XX
Ethernet communication
ACGM0143V4EN
The first two placeholders should specify the communication port to be used.
Optional. For C-NET must be "N".
Optional. The second two placeholders specify the PLC station number if the PLC is
connected via C-NET.
4 Namespaces
77