Panasonic FP OPC Server User Manual page 72

3 Graphical User Interface (GUI)
Parameter
"Use ET-LAN unit"
"Station No."
"IP address"
"Port number"
"Computer port no."
When the option "Use link station No." is activated, only one destination can be entered.
•
Parameter
"Destination"
The following command buttons are available:
"OK"
"Initialize"
72
Description
Activate the option when you are using the ET-LAN unit.
Do not activate the option when using the Ethernet-
RS232C converter, etc., for example.
Specify a value between 1 and 64 in decimal format
(default: 1). The destination station number must
be different from the station number entered under
"Computer".
(If no ET-LAN unit is used, the setting under "Station No." is
ignored.)
Specify the IP address of the destination (PLC) to
communicate with.
Specify a value between 1 and 32767 in decimal format
(default: 1025) that is different from the port number shown
next to "Computer port no.".
Read-only field displaying the port number you have
entered in the previous dialog for information.
Description
"Use ET-LAN Activate the option when you are using the ET-LAN unit.
unit"
Do not activate the option when using the Ethernet-
RS232C converter, etc., for example.
"IP address" Specify the IP address of the destination (PLC) to
communicate with.
"Port number" Specify a value between 1 and 32767 in decimal format
(default: 1025) that is different from the port number
entered under "Computer".
"Station No." Specify a value between 1 and 64 in decimal format
(default: 1). The destination station number must
be different from the station number entered under
"Computer".
(If no ET-LAN unit is used, the setting under "Station No." is
ignored.)
Use this command button to save the communication settings. However, the
current settings are not entered in the list of registrations. If you want to enter
them to the list, use "Add registration" before selecting "OK".
Use this command button to reset the current parametersettings to the default
values.
ACGM0143V4EN