Stop The Fp Opc Server Application; Channels - Panasonic FP OPC Server User Manual

The default project file (specified under "Tools" > "Options") is automatically loaded, the OPC
subsystem is started and the client is connected to the server. If no default project has been
specified, the most recently used project is loaded.
Note
If the OPC server application is started manually but the OPC subsystem has not been
started, a new client connect starts the OPC subsystem and connects to this server instance.
Related topics
Options
System tray
2.2.2

Stop the FP OPC Server application

The OPC server application can be stopped in two ways:
• manually, e.g. by user intervention
• automatically: The OPC server automatically stops when all clients have disconnected
and when the configuration window is minimized to the system tray.
Manual stop
1. Stop the FP OPC Server application manually
•
•
2.3

Channels

A channel represents a means of communication. The following means of communication
are possible:
• Serial communication
• Ethernet
• USB
Please also refer to:
ACGM0143V4EN
(page 45)
(page 73)
Select "Exit" in the "File" menu or tray icon menu
Select the close button of the application window
(RS232)
2 First steps using the FP OPC Server
21