Siemens Climatix HMI-TM Basic Documentation page 30

Modify scheduler
Delete scheduler
30 / 38
Siemens
Building Technologies
Follow the steps to modify time and/or value of a time scheduler point.
1. Enter the Scheduler page.
2. Press key UP/DOWN to select the weekday and press key ENTER.
3. Press key UP/DOWN to select scheduler point to modify. Press key
ENTER.
4. Press key UP/DOWN to modify the time value. The value is displayed on
the top underlined with a dash line. Press key ENTER.
5. Press key UP/DOWN to modify the value on the vertical axis. The value is
displayed on the top underlined by a dash line. Press key ENTER.
6. Repeat step 3 through 5 to modify another scheduler point, if needed.
Follow the steps to delete a scheduler entry:
1. Enter the Scheduler page.
2. Press key UP/DOWN to select the weekday and press key ENTER.
3. Press key UP/DOWN to select the scheduler point,
4. Long press key INFO and hold 3 seconds to delete the scheduler.
It is possible to set maximum 6 scheduler entries. Afterwards an error message
appears.
Climatix HMI-TM
3BFunctions and operations
CB1P3917en02
2015-07-02