Siemens Climatix HMI-TM Basic Documentation page 28

Enumeration scheduler
28 / 38
Siemens
Building Technologies
Scheduler top line provides additional information as below:
Display Line type
Time Straight line
Time
Dashed line
Value
Time No line
Follow the steps to configure the enumeration scheduler.
1. Enter the Enumeration Scheduler page.
2. Press key UP/DOWN to select the weekday and press key ENTER.
3. Press key UP/DOWN to adjust the time point by 15 minutes, and press key
ENTER.
4. Press key UP/DOWN to adjust the value on the vertical axis. The value is
displayed on the top line. Press key ENTER.
5. Repeat step 3 through 4 until all scheduler entries are set.
Climatix HMI-TM
3BFunctions and operations
Description
A scheduler entry is selected
Time or Value modification of a scheduler entry
No scheduler entry selected
CB1P3917en02
2015-07-02