Siemens Climatix HMI-TM Basic Documentation page 24

Acknowledging an
alarm
Sorting methods
24 / 38
Siemens
Building Technologies
If one of the four pages does not exist, the next page will be displayed directly.
On AlarmList and AlarmHistory pages, select Acknowledge to acknowledge all
active alarms and it will go to the confirmation page as follows:
By default, the ALARM LED will be blinking in red at the intervals of one second if
there are unacknowledged active alarms. The ALARM LED will be constant in red if
there exists active and acknowledged alarm.
The specific sorting methods of alarms can be defined by application engineer.
Users can choose to view the alarm information by the order of time, object ID,
class and state.
To change the sorting methods, select Sort order 1 or Sort order 2 on the Alarm
list/-history settings page, and the following page will be displayed:
Select one sorting method on this page and press key ENTER to confirm the
selection.
Climatix HMI-TM
3BFunctions and operations
CB1P3917en02
2015-07-02