Jacuzzi LLUSION 6636 Installation And Operating Instructions Manual page 13

AIR BATH CONTROL PANEL OPERATION
Normal Mode: Press this button to turn the
blower ON. The indicator light will come on.
The blower will be on for 20 minutes at a con-
stant intensity. The intensity may be changed
by using either the up arrow button or the down
arrow button. Pressing this button a second
time will turn the blower OFF. The control will
automatically remember the last mode used.
When the blower is turned off, the indicator
light will go off and the blower will continue
to run for 10 seconds to allow the heater
element to cool.
Wave Mode: Press this button to change the
blower's power from a minimum to a user de-
fined maximum. The blower intensity will vary
from a minimum to the user defined maximum
and back to the minimum in about 6 seconds
producing a wave effect. The indicator light's
intensity changes smoothly showing this Wave
mode. Press this button a second time to re-
turn to normal mode where the blower's power
is constant.
Pulse Mode: Press this button to change the
blower's power rapidly from the minimum to a
user defined maximum. The blower intensity
is OFF for about 1.5 seconds then ON at the
user defined maximum for about 1.5 seconds
producing a pulse effect. The indicator light
flashes showing the Pulse mode. Press this
button a second time to return to normal mode
where the blower's power is constant.
In the Normal mode with the blower power con-
stant, press the UP arrow to increase or the
DOWN arrow to decrease. In Wave or Pulse
mode these buttons change the blower's power
to a user defined maximum.
9
©
Jacuzzi Whirlpool Bath BR28000B 4/05