Location And Function Of Parts And Controls; Front / Rear / Left Side / Right Side / Bottom - Sony FWD-42PV1A Operating Instructions Manual

Location and Function
of Parts and Controls
Front / Rear / Left side / Right side /
Bottom
Front
Rear
2
4 5 6 7
Left side
7
5
1 Indicator section
For details on the Indicator section, see "Indicator
Section" on page 8 (GB).
1
2 Control button section
For details on the control button section, see "Control
3
Button Section (Top)" on page 8 (GB).
3 Stand installation hooks
Use these hooks to install the stand (not supplied).
4 AC OUT socket (three brade type)
You can connect a device consuming small power to
this socket and supply power when setting up an
audio/visual system (the maximum current rating:
0.25 A; the maximum power consumption: 30 W). For
more details, consult your Sony dealer.
Note
Be sure not to connect the device of which current
rating or power consumption exceeds its rating.
5 7
5 SPEAKER Socket
Connects the speakers (not supplied) to this socket to
output the audio matching the signal displayed on the
screen.
6 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the POWER/STANDBY indicator lights up in
red and the display goes into the standby mode.
For more details on the power cord, see "Connecting the
AC Power Cord" on page 15 (GB).
7 Connector panel
For details on the connector panel, see "Connector Panel
(Bottom)" on page 9 (GB) and "Connector Panel (Left
side)" on page 10 (GB).

Location and Function of Parts and Controls

Right side
Bottom
6 7
4
5
7
(GB)