Lowers The Brightness Level Gradually; Setting An Ip Address And Communication Speed; Obtaining An Ip Address Automatically (Dhcp); Setting An Ip Address Manually (Manual) - Sony FWD-42PV1A Operating Instructions Manual

SCREEN SAVER Function / Setting an IP address and communication speed

Lowers the brightness level gradually

When a still image is displayed for more than five
minutes, gradually lowers brightness and helps to
prevent image retention.
1
In the SCREEN SAVER menu, press M/m to
move the cursor (yellow) to "Auto Dimmer" and
press ENTER.
The following menu appears on the screen.
SCREEN SAVER
Pic. Inversion: Off
Pic. Orbit
All White: Off
Background: Gray
Auto Dimmer: Off On
On
Select Set
ENTER
2
Select On with M/m and press ENTER.
To cancel Auto Dimmer
Select Off in step 2.
Setting an IP address and
communication speed
When the option adaptor BKM-FW32 (Network
Management Adaptor) is installed in the
COMMUNICATION slot in the display unit, set an IP
address and communication speed to control the
display unit via the network.
Note
Setting of an IP address and a communication speed is
completed by selecting "Execute" and pressing ENTER.
When the setting is not completed properly, an error
code will be displayed. In such a situation, confirm
the setting values and set up again.
Obtaining an IP address
automatically (DHCP)
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: Standard
Adjust Picture
Adjust Sound
Select Set
ENTER
42
(GB)
Exit
MENU
Exit
MENU
2
Select "INITIAL SETUP/INFORMATION" with
M/m and press ENTER.
The INITIAL SETUP/INFORMATION menu
appears on the screen.
INITIAL SETUP/INFORMATION
Language: English
Color System: Auto
Auto Shut Off: Off
Auto Screen Adjust: On
Information
IP Address Setup
Speed Setup
Select Set
ENTER
3
Select "IP Address Setup" with M/m and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP
Manual
Select Set
ENTER
4
Select "DHCP" with M/m and press ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP Cancel
Manual Execute
Select Set
ENTER
5
Select "Execute" with M/m and press ENTER.
An IP address is automatically obtained.
Setting an IP address manually
(Manual)
1
Select "Manual" in step 4 of "Obtaining an IP
address automatically (DHCP)" and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
Manual
IP Address: 000 . 000 . 000 . 000
Subnet Mask: 000 . 000 . 000 . 000
Gateway Address: 000 . 000 . 000 . 000
Primay DNS: 000 . 000 . 000 . 000
Secondary DNS: 000 . 000 . 000 . 000
Execute
Select Set
ENTER
2
Select an item to be set manually with M/m and
press ENTER.
INITIAL SETUP/INFORMATION
IP Address Setup
Manual
IP Address: 000 . 000 . 000 . 000 000 . 000 . 000 . 000
Subnet Mask: 000 . 000 . 000 . 000
Gateway Address: 000 . 000 . 000 . 000
Primay DNS: 000 . 000 . 000 . 000
Secondary DNS: 000 . 000 . 000 . 000
Execute
Select Set
ENTER
Exit
MENU
Exit
MENU
Exit
MENU
Exit
MENU
Exit
MENU