Watching The Picture; Switching The Input Signal - Sony FWD-42PV1A Operating Instructions Manual

Watching the Picture

Before you start
• Power on the display.
• Power on the connected equipment and play a video
source.
• To display the input signal information and Picture
Mode on the screen when turning on the power or
switching the input signal, set "Display" in the
Custom Setup menu to On.
• To select the language of the menus, see "Selecting
the On-screen Language" on page 37 (GB).

Switching the Input Signal

Input1 DVI: Selects the signal (digital RGB)
input to the INPUT1 connectors.
Input2 RGB: Selects the signal (analog RGB)
input to the INPUT2 connectors.
Input2 Component: Selects the signal
(component) input to the INPUT2
connectors.
Option1 Video: Selects the signal (video signal)
input from the equipment connected to the
connectors of the option 1 slot.
Option1 S Video: Selects the signal (S video
signal) input from the equipment
connected to the connectors of the option 1
slot.
Option1 RGB: Selects the signal (analog RGB
signal) input from the equipment
connected to the connectors of the option 1
slot.
Option1 Component: Selects the signal
(component signal) input from the
equipment connected to the connectors of
the option 1 slot.
Press INPUT1, INPUT2 or OPTION1 button on
the Remote Commander to switch the input signal.
When multiple formats of signals can be input to
the selected input connector, the indication
changes every time you press the corresponding
button.
For example, every time you press the INPUT2
button, the indication switches to "Input2 RGB"
or "Input2 Component" alternately. The selected
input signal appears on the screen.
Color system or resolution/vertical frequency
Signal type
Input1 DVI
640x480/60
Vivid 15 : 07
Picture mode
You can switch the input signal using the
OPTION button on the display unit.
Notes
• We recommend input source video equipment
equipped with a TBC (time base corrector). If the
display receives a signal without TBC, the picture
may disappear due to disturbance of the sync signal.
• If signals of the same format are input from multiple
systems, the Picture Quality setting will default to
the most recently set value (Only when the signal
formats are identical).
Watching the Picture
23
(GB)