Zooming In On A Picture; Adjusting The Position Of The Inset Picture (For Pinp Only) - Sony FWD-42PV1A Operating Instructions Manual

Viewing two pictures at the same time

Zooming in on a picture

When P&P is selected
1
Select "Picture Size" with M/m and press ENTER.
2
Keep pressing </, to change the size of the
picture, then press ENTER.
When PinP is selected
1
Select "Picture Size" with M/m and press ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP: PinP
Active Picture: Main
Picture Size: Large
Picture Position Small
Select Set
ENTER
2
Press M/m to select the size, then press ENTER.
Large: Increases the size of the inset picture.
Small: Decreases the size of the inset picture.
Adjusting the position of the inset
picture (For PinP only)
1
Select "Picture Position" with M/m and press
ENTER.
PICTURE AND PICTURE(PAP)
PAP: PinP
Active Picture: Main
Picture Size: Small
Picture Position
Select Set
ENTER
2
Adjust the position of the inset picture with M/m/
</,, then press ENTER.
34
(GB)
Exit
MENU
Exit
MENU
Notes
• You can show two pictures only when "Multi
Display" is set to "Off."
• You can select any of the following combinations of
input signals for the PICTURE AND PICTURE
function.
Digital Analog
RGB
RGB
Digital RGB
- -
Analog RGB -
-
Component
Supported Supported
Y/C Supported Supported
Composite Supported
Supported
Component
Y/C Composite
Supported
Supported Supported
Supported Supported
Supported
-
Supported Supported
Supported
- -
Supported -
-