Connecting The Tellurus Display - Waterous AQUIS ULTRAFLOW Installation And Operation Manual

Safety Introduction

Connecting the Tellurus Display

3
2
Product Overview
1
|
45 62
Installation Operation
Use the illustration and instructions to connect the
Tellurus display.
1 Connect the compatible connector on the
Tellurus HMI cable assembly to the Tellurus
display connector.
2 Connect the compatible connector on the
Tellurus HMI cable assembly to the display
extension cable connector.
3 Connect compatible connector on the display
extension cable to the control box—the Tellurus
HMI CANbus connection.
Note: Connect 2 or more cables together to
achieve a desired length.