Connecting The Concentrate Pump, Pressure Sensor, And Source Select Valve - Waterous AQUIS ULTRAFLOW Installation And Operation Manual

Safety Introduction

Connecting the Concentrate Pump, Pressure Sensor, and Source Select Valve

Product Overview
2
1
|
47 62
Installation
Use the illustration and instructions to connect the
concentrate pump speed sensor, concentrate line
pressure sensor, and source select valve.
1 Use a sensor cable to connect the concentrate
pump speed sensor to the control box—the
pump speed connection.
3
Note: Connect 2 or more cables together to
achieve a desired length.
2 Use an M12 cable extension to connect the
concentrate line pressure sensor to the control
box—pump discharge pressure connection.
Note: Connect 2 or more cables together to
achieve a desired length.
3 Install the installer supplied source select valve
into the apparatus plumbing. Connect the valve
to the on-board concentrate supply tank and the
auxiliary supply line. Connect the valve position
switch cable to the control box—the pump
intake select switch connection.
I-2257 L-1222-7
Operation