Connecting The Concentrate Supply Level Sensors - Waterous AQUIS ULTRAFLOW Installation And Operation Manual

Safety Introduction

Connecting the Concentrate Supply Level Sensors

1
2
Product Overview
3
|
46 62
Installation Operation
Use the illustration and instructions to connect the
concentrate supply level sensors.
1 Use a sensor cable to connect the tank high
switch to the control box—concentrate tank
high connection.
Note: Connect 2 or more cables together to
achieve a desired length.
2 Use a sensor cable to connect the tank low
switch to the control box—the concentrate tank
low connection.
Note: Connect 2 or more cables together to
achieve a desired length.
3 Optionally, you can install a locally sourced,
tank-level sensor and panel indicator. Use the
field wire-able, M12 connector and shrink wrap,
supplied in the install kit, to provide an
environmental seal between the connector and
installer provided cable. Refer to:
Level Cable—Installer Supplied" on page 34
to assemble the cable.
Note: Follow the instructions from the tank
sensor and panel indicator manufacturer
to install those components.
I-2257 L-1222-7
"Supply Tank