RGBlink mini+ Installation Precautions page 2

Note: When the yellow font is displayed, it is in the editing interface, and the
modification is considered successful until the blue font is displayed on the
interface.
1.2 Connect mini+, PTZ camera and PC via a router:
Suppose my router address is 192.168.1.1 and the default address of the PTZ
camera is 192.168.100.88. Now I need to set the IP addresses of all devices
(mini+, PTZ cameras, PC) to the same network segment address, that is,
192.168.1.x.
1.2.1 First set my computer IP to 192.168.100.100 (any one of 192.168.100.2-
192.168.100.254), the subnet mask is 255.255.255.0, and leave the others
blank.
Address：S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian P.R.C
Tel：4008 592 315
Email: support@rgblink.com
Fax：+86 592 5788216
http://www.rgblink.com
2