Invacare Perfecto2 V User Manual page 22

Invacare® Perfecto₂™ V Oxygen Concentrator
5. Replace the filter access door and install the air scoop
G onto the filter access door by inserting the six tabs
H on the air scoop into the six slots E on the sides of
the filter access door.
6. Attach the humidifier bottle adapter D to the humidifier
bottle B by turning the wing nut I on the humidifier
bottle counterclockwise until it is securely fastened.
22
7. Select the location for the humidifier bottle/adapter
assembly:
• When placing the humidifier bottle in the
compartment L on the concentrator, attach the
humidifier bottle/adapter tube D to the oxygen
outlet connector K on the concentrator.
• If using the optional accessory Humidifier Bottle
Holder (M1521) to position humidifier at patient
side location , place the accessory on a flat surface
as close to the patient as possible. Attach an
oxygen tubing connector (M4650) to the end of the
humidifier bottle/adapter tube. Connect one end
of the oxygen supply tubing (M4150 or M4250) to
the free end of the oxygen tubing connector and
the opposite end to the oxygen outlet connector
on the concentrator.
When using tubing connections longer than 2.1
m (7 ft) in length, position the humidifier as
close to the patient as possible to allow for
maximum humidification output.
For optional accessories, refer to 4.1 Optional
Accessories, page 17.
8. Connect the nasal cannula. Refer to 6.3.2
Connecting/Positioning the Nasal Cannula, page 23.
1195056-B