mangOH green User Manual page 18

mangOH green User Guide
Rev 2 Jan.16
Note: A SIM card is not required if you want to connect to a LAN using the Ethernet port.
To install the SIM card(s):
1. Place the Dev Kit face-down (as shown).
1—mini-SIM (CN801)
2—micro-SIM (CN802—bottom)
3—micro-SD (CN802—top)
Figure 3-12: SIM Connector and micro-SD Locations
2. Insert the SIM card(s) with contacts face-down into the desired slot(s)—note the
locations of the notched corners of the cards in
inserted with the flat end first, and the micro-SIM is inserted with the notched end
first.)
Important:
CN802 is a dual-connector—a micro-SIM can be placed in the lower slot,
and a micro-SD can be placed in the upper slot.
Figure 3-13: SIMs—Inserting
18
Figure 3-13. (The mini-SIM is
4117164