Table of Contents
Advertisement
4: Software Setup
Rev 2 Jan.16
This chapter describes software resources that you will need on your computer to
access the mangOH green and develop applications for its CF3 module and
integrated Arduino circuit.
Sample applications and instructional materials are available from the sites
mentioned in this chapter. For detailed information on developing for the mangOH
green, see the mangOH green Developer's Guide and related documents (available
from mangoh.io).
Install / Update Windows Driver
If you are using a Windows computer, you will need to install the Legator driver for the
CF3 module that you install in your mangOH green.
1. Visit
mangoh.io
to download the Windows driver and driver installation instruc-
tions for your CF3 module.
2. Install the Windows driver.
3. When the mangOH green is connected via USB to the computer, display the
Device Manager (Control Panel > System > Device Manager).
Figure 4-1: Windows Device Manager
If the driver installed correctly, you will see the following items listed:
•
Modems > Sierra Wireless WWAN Modem (This is the module in socket J200.)
•
Ports [COM & LPT] > Sierra Wireless DM Port
35
4
4117164
Advertisement
Table of Contents
