Where To I Place My Station; How Do I Manually Set The Time - La Crosse Technology WS-9160UV2 Faqs

Hide thumbs

Table of Contents

Your station is designed for flexible placement on a desk or countertop or close the stand to

position on the wall.

•

Best reception occurs when only one wall is between your station and each sensor outside.

•

Position you station six feet from other electronics and wireless devices. If you suspect RF

(radio frequency) interference, simply move your weather station a few feet.

Note: Only press or hold one button at a time.

1. Hold the SET button to enter the Settings Menu.

2. Use the + or - button to adjust values.

3. Press the SET button to confirm and move to next item or exit.

Settings Menu Order:

•Hello

•Language (English, Español, Français, Deutsch)

•Beep ON/OFF

•12/24 Hour Format

•Hour

•Minutes

•Year

•Month

•Date

•Month/Date, Date/Month

•Fahrenheit/Celsius

•Thank you

Language: The language selected in this menu will control other menu items as well as your full

weekday readout.

Weekday: The Weekday will set automatically when your Year, Month and Date are set.

To begin:

1. On startup or if you hold the SET/TIME button for 2 seconds to enter setting mode. HELLO,

will show for two seconds, then automatically move to language. ENGLISH will show. Press

the + or - button to change to another language (Español, Français or Deutsch). Press the

SET/TIME button to select Beep ON/OFF.

2. Press SET to confirm and move to beep sound ON/OFF. BEEP ON will show. ON flashes.

Press the + or - button to turn the button beep sound off.

3. Press SET to confirm and move to 12/24 hour. The 12Hr will flash and FORMAT will show.

Press the + or - button to choose 12 hour or 24 hour time format.

4. Press SET to confirm and move to the hour. The HOUR will flash. Press the + or - button to

choose the hour.

5. Press SET to confirm and move to the minutes. The MINUTES will flash. Press the + or -

button to choose the minutes.