11.19
Installing the shock absorber
SERVICE WORK ON THE CHASSIS 11
Main work
–
Carefully position the shock absorber into the vehicle from
the bottom.
–
Mount and tighten screw
Guideline
Screw, top
shock absorber
K01280-10
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
F02282-10
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
K00949-10
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01098-11
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
H01546-10
–
Mount and tighten screw
1
.
M10
60 Nm (44.3 lbf ft)
A
.
2
.
M16x1.5
100 Nm (73.8 lbf ft)
3
engages in the foot brake cylinder.
4
.
M6
10 Nm (7.4 lbf ft)
5
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
6
.
®
Loctite
2701™
57