Husqvarna TC 250 2021 Owner's Manual page 90

12 BRAKE SYSTEM
88
–
Check that spring plate
6
plate in the brake caliper bracket are seated properly.
Info
The arrow on the spring plate points in the direction of
rotation of the brake disc.
M00288-10
–
Insert the new brake linings, insert pin
3
pins .
Info
Always change the brake linings in pairs.
Make sure that decoupling plate
the piston side brake lining.
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
M01329-10
point.
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
O-ring.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
K01316-10
5
in the brake caliper and sliding
4
, and mount cotter
7
is mounted on
A
.
p. 127)
1 2
with membrane and the