Installing The Lower Triple Clamp - Husqvarna TC 250 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10
50

Installing the lower triple clamp

102146-10
K01251-10
H01182-11
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount screw but do not tighten yet.
–
Position the fork legs.
5
Air bleeder screw
the front.
A
Valve of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
p. 129)
1
is correctly posi-
3
and O-ring .
of the right fork leg is positioned to