Changing The Glass Fiber Yarn Filling In The Main Silencer - Husqvarna FE 350s 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.30
74

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
S03541-10
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 66)
–
Remove the right side cover. (
–
Remove main silencer. (
Main work
–
Remove all the screws on the main silencer.
–
1
Take off silencer cap
–
Remove glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling between the inner tube
and the outer tube.
–
Position the silencer cap with the filter and the O-ring in the
outer tube.
–
Mount and tighten all of the screws.
Guideline
Screws on main
silencer
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. (
p. 68)
p. 70)
p. 71)
2
with the filter and O-ring
3
from main silencer
M5 7 Nm (5.2 lbf ft)
p. 72)
p. 71)
p. 68)
.
4
.