Closing The Fuel Tank Filler Cap; Cold Start Button - Husqvarna FE 350s 2021 Owner's Manual

Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
6.12

Closing the fuel tank filler cap

6.13

Cold start button

–
Press release button
clockwise, and lift it off.
S03546-10
–
Mount fuel tank filler cap and turn it clockwise until the
release button
Info
Route fuel tank breather hose
S03547-10
The cold start button
valve body.
The electronic fuel injection system extends the injection time if
the engine is cold and the ambient temperature is low. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
The cold start button is activated – The cold start button is
•
pushed in all the way.
The cold start button is deactivated – The cold start button
•
is in its basic position.
S03548-10
1
, turn the fuel tank filler cap counter-
1
engages.
2
without kinks.
1
is fitted to the bottom of the throttle
CONTROLS 6
23