Scan Mode With Triple Watch Or Dual Watch; Busy Channel Lockout - Uniden MHS155UV Owner's Manual

How it Works? (UHF CB)
channel and resume scanning.
• To end the scan, press the SCAN/MEM button again; the radio
remains on the last scanned channel.

Scan Mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in Scan mode, the radio
checks VHF channels 16 and 67 every two seconds, then goes on to
scan the next channel; with Dual Watch turned on, the radio checks
Instant channel every two seconds.

Busy Channel Lockout

This feature prevents accidental transmission on a busy channel. For
example, BCL is used when CTCSS or DCS is selected to prevent
transmission when the radio detects a transmission from another unit
using the same CTCSS or DCS code.
1. Press and hold BAND/MENU to enter Menu setting.
2. Press ENT/L/M/H till LC setting flashes on the LCD. Press CHANNEL
UP or CHANNEL DOWN to turn the setting on or off. When it is
turned on BCL will appear on the screen. Press ENT/L/M/H to save.
3. Press and hold BAND/MENU to exit out of the Menu.
UNIDEN MHS155UV
27
UHF CB+VHF Marine Radio