Table of Contents
Advertisement
TRAP LEAKING XENON
Monitor not working
Crack in seam of cartridge
Loose fittings on cartridge
Crack in hose to trap or hose is not attached
Cartridge saturated
Charcoal has settled
OXYGEN HOSE COMES OFF
Input pressure too high
No clamp for hose at input fitting
PULMONEX II DOUBLE TRAP XENON SYSTEM
Check trap effluent manually
Seal with silicone
Seal fitting with silicone
Replace or reconnect hose
Replace cartridge
Shake cartridge gently to loosen charcoal
Adjust input pressure to not greater than 8 psi
Install clamp
13
Hide quick links:
Advertisement
Table of Contents
