Appendix B - Conformance To Standards - biodex PULMONEX II Operation Manual

B. Appendix B - Conformance
to Standards
This equipment conforms to the following safety standards:
Standard
IEC60601-1-2
Table 1.1. Safety standards
Accompanying EMC Documents
this medical electrical equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect medical electrical equipment.
Use of accessories, transducers and cables other than those specified, with the exception
of accessories, transducers and cables sold by the manufacturer of this equipment, as
replacement parts for internal and external components, may result in increased emissions
or decreased immunity of the equipment.
The Pulmonex should not be used adjacent to or stacked with other equipment. If the
Pulmonex is used while positioned adjacent to other equipment, it should be observed to
verify normal operation in the configuration in which it will be used.
List of Cable Accessories
The list in Table 1.2 includes all accessory cables supplied with the Pulmonex for which the
manufacturer of this equipment claims compliance to EN 60601-1-2 when used with the Pulmonex.
Cable description
Power Cable
Table 1.2. Pulmonex cable
PULMONEX II DOUBLE TRAP XENON SYSTEM
Edition and/or date
1993
Part no.
Biodex # 945-110-e730
Cable length
10ft
15