Gearbox (Serial Number Below 240001001) - Toro Greensmaster Flex 21 Service Manual

Gearbox (Serial Number Below 240001001)

10
7
8
RIGHT
FRONT
1. Gearbox assembly
2. Flange gasket
3. Engine gear
4. Engine adapter
Gearbox Removal
1. Park mower on a level surface. Make sure engine is
OFF. Remove high tension lead from the spark plug.
2. Drain oil from gearbox assembly (see Change Gear-
box Fluid in this section).
3. Remove traction control and reel control cables from
gearbox (see Control Cable Replacement in the Service
and Repairs section of Chapter 6 – Chassis and Con-
trols).
Traction and Reel Drive System (Rev. C)
1
6
9
2
3
4
5. Engine
6. Set screw
7. Cap screw
Figure 31
4. If installed, remove transport wheels (see Wheels in
the Service and Repairs section of Chapter 6 – Chassis
and Controls).
5. Remove traction drive belt covers and belts from
both sides of mower (see Traction Drive Belt Replace-
ment in this section).
6. Remove flange nut that secures traction drive pulley
(Fig. 32) on both sides of mower. Remove pulley wash-
er, pulley and woodruff key from both sides.
Page 4 – 24
5
8. Lock washer
9. Washer
10. Flange nut
Greensmaster Flex 21