Graco Monark Instructions-Parts List Manual page 3

FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re-
sult in a fire or explosion and serious injury.
D Ground the equipment and the object being sprayed. Refer to Grounding on page 4.
D If there is any static sparking or you feel an electric shock while using this equipment, stop spray-
ing/dispensing immediately. Do not use the equipment until you identify and correct the problem.
D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed/dispensed.
D Keep the spray/dispense area free of debris, including solvent, rags, and gasoline.
D Before operating this equipment, electrically disconnect all equipment in the spray/dispense area.
D Before operating this equipment, extinguish all open flames or pilot lights in the spray/dispense
area.
D Do not smoke in the spray/dispense area.
D Do not turn on or off any light switch in the spray/dispense area while spraying/dispensing or while
operating if fumes are present.
D Do not operate a gasoline engine in the spray/dispense area.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
D Keep clear of all moving parts when starting or operating the pump.
D Never operate the pump with the air motor plates removed.
D Before checking or servicing the equipment, follow the Pressure Relief Procedure on page 5 to
prevent the equipment from starting unexpectedly.
WARNING
307141 3