Accessories (Optional) - STEINEL IS 3360 Operation Manual

7� Accessories (optional)
User remote control RC5 EAN 4007841 592806
Additional functions, RC5
– Light ON/OFF 4 h
– User reset
– 100 h burn in, 4 h light ON press for ≥ 5 s
Service remote control RC8 EAN 4007841 559410
Additional functions, RC8
– Time setting, CH1
– Test / normal mode
– Twilight setting
– Night-time operation
– Daylight operation
– Teach-IN
– Reset
Smart Remote EAN 4007841 009151
– Control via smartphone or tablet
– Replaces remote controls RC5 and RC8
– Load appropriate app and connect via Bluetooth
– Identify the sensors and read parameters
Additional functions, Smart Remote
– Time setting: 5 s - 60 min
– Twilight setting: 2 - 1000 lux
– Initial state; behaviour after applying the light ON/OFF supply voltage
– Burn in
– Sensor
Detailed descriptions are provided in the operating instructions for the particular
remote control.
8� Operation / maintenance
The infrared sensor can be used for switching light ON and OFF automatically. The
unit is not suitable for burglar alarm systems as it is not tamperproof in the manner
prescribed for such systems. Weather conditions may affect the way the motion
detector works. Strong gusts of wind, snow, rain or hail may cause the light to come
ON when it is not wanted because the sensor is unable to distinguish between sud-
den changes of temperature and sources of heat. The detector lens may be cleaned
with a damp cloth if it gets dirty (do not use cleaning agents).
32