Safety; Safety And Instructional Decals - Toro MK3 Operator's Manual

Safety

This machine has been designed in accordance with
EN ISO 5395:2013.
Improper use or maintenance of this equipment
can result in injury or death. To reduce the
potential for injury or death, comply with the
following safety instructions.
•
Read, understand, and follow all instructions in this
Operator's Manual before operating the cutting
unit.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting hazard of hand
2. Cutting hazard of foot
63–13–039
1. Height-of-cut adjustment
40-13–010
•
Lower the cutting units to the ground, engage the
parking brake, shut off the engine, and remove the
key from the ignition switch whenever you leave
the machine unattended.
•
Be sure that the cutting units are in safe operating
condition by keeping nuts, bolts, and screws tight.
decal40-13-010
1. On-cut adjustment
decal63-13-039
3
214053
decal214053