Adjusting The Stroke On The Low Limit - Shimano GRX RD-RX810 Dealer's Manual

Adjustment

Adjusting the stroke on the low limit

NOTICE
• Check that the inner cable does not interfere with the spokes of the wheel.
• Do not allow the wheel to turn while carrying out this step.
Adjusting the stroke on the low limit
1.
Adjust by turning the low limit screw.
Adjust so that the center of the guide pulley is aligned with the center of the largest
sprocket.
Largest sprocket
Guide pulley
Low limit screw
* Low limit screw
RD-RX810/
RD-RX400
18
*
RD-RX812