Installation - Shimano GRX RD-RX810 Dealer's Manual

Maintenance
Replacement of the plate and the plate tension spring

Installation

Perform the installation in the reverse order from the removal procedure.
1.
Apply the dedicated grease to the plate axle.
NOTICE
• Do not apply grease outside of the application area indicated above. If grease is
applied here, it will get inside the roller clutch and friction will be lost.
2.
Insert the plate axle, then fit the tip of the plate tension spring in the
hole of the plate.
RD-RX810
Plate axle
Grease application area
Grease number: Premium Grease
(Y04110000)
Plate tension spring
Plate axle
31
Plate
8 - 10 N·m