To Ensure Safety - Shimano GRX RD-RX810 Dealer's Manual

TO ENSURE SAFETY

TO ENSURE SAFETY
WARNING
• Be sure to follow the instructions provided in the manuals when installing the product.
Only use SHIMANO genuine parts. If a component or replacement part is incorrectly
assembled or adjusted, it can lead to component failure and cause the rider to lose
control and crash.
• Wear approved eye protection while performing maintenance tasks such as
replacing components.
Be sure to also inform users of the following:
• Clean the chain and QUICK-LINK with an appropriate chain cleaner regularly. Intervals
between maintenance depend on the use and riding circumstances. Never use alkali
based or acid based solvents such as rust cleaners. If those solvents are used the chain or
QUICK-LINK might break and cause serious injury.
• Check the chain for any damage (deformation or cracking), skipping, or other
abnormalities such as unintended gear shifting. The chain may break, and you may fall. If
any problems are found, consult your place of purchase or a distributor.
„ When using TL-CT12:
• Be careful not to get injured by the blade or needle while working.
• Be careful not to get your fingers pinched by the tool while working.
• Keep the tool out of the reach of small children.
NOTICE
Be sure to also inform users of the following:
• For SHADOW RD+, be sure to check that the plate unit cover and the plate unit rubber
cap are installed before riding the bicycle.
• If gear shifting operation does not feel smooth, consult the place of purchase for
assistance.
• The gears should be periodically washed with a neutral detergent then lubricated. In
addition, cleaning the chain and QUICK-LINK with a neutral detergent and lubricating
them can be an effective way of extending the life of the chain and QUICK-LINK.
• Products are not guaranteed against natural wear and deterioration from normal use
and aging.
4