Connection And Securing Of The Inner Cable; Outer Casing Length - Shimano GRX RD-RX810 Dealer's Manual

Adjustment

Connection and securing of the inner cable

Connection and securing of the inner cable

Outer casing length

1.
Loosen the B-screw to the position shown in the figure.
Make sure that the stopper plate touches the bracket body without leaving a gap.
2.
Determine the length of the outer casing.
Fit a sealed outer cap to the end of the outer casing. Align the end of the outer cap to
the bottom edge of the outer casing holder on the rear derailleur.
Make sure to leave enough slack in the outer casing.
NOTICE
• Make sure to use OT-RS900 for the outer casing.
Outer casing
Outer casing holder
Sealed outer cap (aluminum type)
Stopper plate
Bracket body
B-screw
14