Table of Contents
Advertisement
CNR card with LAN
By using an audio codec, the AC'97 digital link providing by CNR allows for cost-effective,
high-quality, integrated audio on the SynactiX 2E platform. In addition, an AC'97 soft modem
can be implemented with the use of a modem codec. AC'97 digital link allows several
external codecs to be connected to the ICH2. The digital link is expanded to support two
audio codecs for up to 6 channels of PCM audio output(full AC-3 decode) or a combination
of an audio and modem codec.
Expansion Slots & I/O Ports description
Slot / Port
Description
PCI 1
First PCI slot.
PCI 2
Second PCI slot.
PCI 3
Third PCI slot.
IDE 1
Primary IDE port.
IDE 2
Secondary IDE port.
CNR
CNR slot.
AGP
AGP slot.
FLOPPY
Floppy Drive Port.
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
keyboard password power-on function jumper JKB, and enable/disable onboard audio
jumper JSD etc. Pin 1 for all jumpers are located on the side with a thick white line ( Pin1→
), referring to the mainboard's silkscreen. Jumpers with three pins will be
shown as
to represent pin1 & pin2 connected and
& pin3 connected. For default jumper settings, please refer to the following table:
JFS0
1-2
(Auto)
JFS1
1-2
(Auto)
JCC
2-3
(Normal Status)
JSD
2-3
(Enable onboard Audio)
JKB
1-2
(Enable KB Power-on)
JAV
Open
(Enable Flash BIOS)
JFUSB/JUSB 1-2
(Enable Front/Back Panel USB Device Wake-Up Function)
Installation Instructions
CNR card with modem
CNR card with audio
Manual for Synactix 1E
to represent pin2
Advertisement
Table of Contents
