Sx-2130 Infrared Receiver - Sony SX-1070A Instructions For Use Manual

SX-2130 Infrared Receiver

8
CH selector
7
Clip
6
Charge terminal
1VOL (volume) control/power switch
Use this switch to adjust the volume. This switch also
acts as a power switch. To turn on the power, turn the
control upward. To turn the power off, turn the
control downward until you hear a click. To increase
the volume, turn it upward. To decrease the volume,
turn it downward.
2POWER indicator
Lights when the power is turned on. The indicator
becomes dimmer as the built-in lithium ion battery
discharges. When the battery is completely
discharged, the indicator will not light. Thus, this
indicator allows you to check the charge condition of
the built-in battery.
3Infrared receiving lens
Picks up infrared from the SX-9131A. Monitor from
a position in the hall where you can see the radiator.
If you cannot see the radiator you will not be able to
hear the sound because the infrared will be
interrupted.
1
2
3
SX-2130 Infrared Receiver
4Earphone jack (minijack)
Connect the supplied earphone.
5CH (channel) display window
Indicates the channel number selected with the CH
selector 8.
6Charge terminal
The battery is charged through this terminal.
7Clip
Use this clip to attach the receiver to your clothing.
You can also hang the receiver around your neck
using the supplied strap.
8CH (channel) selector
Selects the channel to monitor. The channel number
appears in the CH display window. "0" corresponds
to the original channel.
VOL control/power switch
POWER indicator
Infrared receiving lens
4
5
CH display window
6
Charge terminal
Earphone jack
35