NOVOFLEX VR-System III Manual page 9

Stitching the single frames together with
These are the basic steps, working with the stitching software PanoramaStudio for Windows
with your Panorama-VR-System III. You will find a detailed PDF manual with further information on the software CD.
In the upper area you see a little preview, showing the complete panorama and a red frame, which indicates your cur-
rent position in the main window below.
In the case of wrong sequence click on the button "Reverse image order".
PanoramaStudio
Step 1:
Select pictures:
Back home, copy all pictures belonging to one panorama
to a folder on your desktop. Start the software Panora-
maStudio and click on "Import..." to select the input im-
ages for the panorama from the desired folder.
Navigate into the folder with the sin-
gle frames, click on the first picture,
hold the
on the last image. After that all pic-
tures between will be selected. Now
click on "Open".
The single frames will be loaded one
after the other and shown in the row
below.
, which is in the package
TM
-key pressed and click