Advertisement
Quick Links
Tip
As a supplement or highly modular alternative, we recommend the new NOVOFLEX Gonio-
meter head QUBE. This device consists of several modules, whereby each module is used for
only one rotation around the respective axis. The units can be combined in any order using the
Q-coupling system.
Information
For more information, advice and tips about our products contact your photo dealer or the dis-
tributor of NOVOFLEX products in your country (have a look at the "Where to buy" section of
our website to fi nd your distributor) or visit our website www.novofl ex.com.
For personal advice about possible accessories which are suitable for your NOVOFLEX pro-
duct please contact the following phone number or send us an E-mail.
NOVOFLEX Phone: +49 8331 88888
NOVOFLEX E-Mail: mail@novofl ex.com
© NOVOFLEX Präzisionstechnik GmbH
Phone +49 8331 88888, Fax +49 8331 47174
Email mail@novofl ex.com, Internet www.novofl ex.com
Page 12
Brahmsstraße 7
D-87700 Memmingen
Status 03/24
Geared Head KOPF
Illustration shows product variant KOPF
Congratulations on your purchase of the KOPF
head. Whilst you should have no diffi culty in using your new geared head, you may fi nd the
following explanations useful.
2
MANUAL
2
-PRO Kit
2
, the compact, high-precision three-way geared
Advertisement
Related Manuals for NOVOFLEX KOPF2
Summary of Contents for NOVOFLEX KOPF2
- Page 1 For more information, advice and tips about our products contact your photo dealer or the dis- tributor of NOVOFLEX products in your country (have a look at the “Where to buy“ section of our website to fi nd your distributor) or visit our website www.novofl ex.com.
-
Page 2: Technical Data
Nomenclature Reset previously defi ned angular positions or set defi ned angular distances Quick release unit Q=MOUNT The joints of the transverse and longitudinal axes have ad- 3/8“-16 mount with 1/4“-20 adapter and 1/4“-20 mounting screw justable angle rings (14) with Clamping screw Q=Mount 90°... - Page 3 Open the unit‘s clamping screw (2) and insert the camera clamping exchange plate into the quick relase unit. Now For better illustration, close the clamping screw again and page 6 the underside is also check that the camera is securely shown here held in the coupling.
-
Page 4: Product Description
We recommend The ARCA-compatible dovetail profi le (7) allows the geared head to be inserted directly into plates of the NOVOFLEX QPL se- a corresponding quick release unit. When using a quick release of the Novofl ex Q-System, the... - Page 5 Now screw the larger video pin (5) into the same threaded hole on the top of the PANORAMA Assembling the components and on the tripod II panning base. With the alternative panning base PANORAMA=Q II with quick release unit (18), the video pin is not needed, as the combination quick realease unit / mounting bracket is already rotationally secure.
- Page 6 Quick release unit Q=MOUNT at the Tip: Mounting accesso- ries on or underneath To prevent the quick release unit on the mounting the mounting brackets bracket from twisting, it has a hole on the undersi- using the 1/4“-20 threa- de with a grub screw (4), which is replaced by the ded screw larger video pin (5) when used with the KOPF To have access to the...
Need help?
Do you have a question about the KOPF2 and is the answer not in the manual?
Questions and answers